Benelec 09211B Manual do utilizador - Página 5
Procurar online ou descarregar pdf Manual do utilizador para Fonte de alimentação Benelec 09211B. Benelec 09211B 6 páginas. Linear 8 / 10 amp 13.8 volt power supply with battery management
Imprimir páginaFAN CONNECTOR (WHERE FITTED)
REAR VIEW
8
8.
Temperature Switch Socket
CONNECTING THE POWER SUPPLY (WHERE FAN CONNECTOR FITTED)
Two-way Radio (Load)
Motorola DC Lead
Part No. 105061
Temp. Sensor
for DC Controls
Repeater
Housing
INSTALLATION (WHERE FAN CONNECTOR FITTED)
•
This supply should be installed by suitably qualified personal.
•
The power supply should be located in a dry, well-ventilated indoor area.
•
Connect the radio to the load terminal and the battery terminals on the rear of the power supply as per the
diagram above. You must ensure that the radio manufacturer's recommended fuse is fitted between the power
supply and the radio. If the power supply is being used in conjunction with the Motorola repeater, you can use
the supplied DC fan lead to connect the power supply to the repeater's fan input socket, and the temperature
sensor is placed between the fins on the heat sink of the repeater where required.
Note: The power supply must be off before any external connections are made or modified
Benelec Pty Ltd. 17 Byrnes St, Botany NSW 2019, Australia,
FAN CONTROL LEAD (WHERE FITTED)
A fan control lead is supplied with the power supply this is
designed specifically for the Motorola repeater housing. The
maximum current rating of this lead is 1 A.
Fuse
DC Fan
Power
BENELEC.COM.AU
+61-2-8397-3333,
To Power
Supply
Battery Drypower 12SB12P-F2
is recommended.
Fan Control
Lead
Part No. 105060
+61-2-9700-1231,
Repeater DC
Fan Power
Repeater
Temp. Sensor
230V AC
IEC Cable
Part No. 10430188B
Page 5 of 6
2023-04-11