Dymo LabelWriter 450 Turbo Manual de início rápido - Página 6

Procurar online ou descarregar pdf Manual de início rápido para Software Dymo LabelWriter 450 Turbo. Dymo LabelWriter 450 Turbo 14 páginas. How to order and insert a roll of labels in the dymo labelwriter
Também para Dymo LabelWriter 450 Turbo: Manual de início rápido (20 páginas), Visão geral (2 páginas), Manual de configuração (11 páginas), Manual de início rápido (10 páginas), Manual do utilizador (19 páginas), Manual de instalação (4 páginas), How-To Manual (3 páginas)

3. Connecting your LabelWriter Printer

Do not connect the printer to your computer until after the

NOTE

software installation is complete.

To connect the power

Plug the power cord into the power adapter. See Figure 3.

Plug the power adapter into the power connector on the bottom of

the printer. See Figure 4.

Plug the other end of the power cord into a power outlet.

Plug the USB cable into the USB port on the bottom of the printer.

Insert the power and USB cables through the cable channel and

set the printer down.

When the software is completely installed, connect the other end

of the USB cable into an available USB port on your computer.

If the printer is not in the printer list when the installation is

Mac OS

complete, refer to the ReadMe file for instructions on how to add

the printer.

Power adapter

Power cord

Figure 3

USB

24VDC

Cable

channel

Figure 4

Power