AFFA AFPD-022 Manual de Instruções - Página 6
Procurar online ou descarregar pdf Manual de Instruções para Amplificador AFFA AFPD-022. AFFA AFPD-022 8 páginas. Professional audio equipment power distributor
FEATURES
l
Using Single Chip Micro Computer (MCU) controller, the delay time is programmable & precise.
The unit is reliable.
l
8 channels and 22KW Power supply, each channel has independence RFI-Filter/EMI-Power
Filter which gets the CE certification, and then they supply clean and stable power for your
equipment.
l
Using three-phase 5-pin industrial socket, make it installed easily and safely.
l
LED voltage instructs the real-time display of the system. LED intuitive interface shows the user
's status and results of operations on the system.
l
Overload Voltage Alarm function: It alarms whenever the voltage is out of the range which you
setup.
l
According to the local voltage standards, you could choose the alarm voltage as
110v,120v,220v,230v,240v. If necessary , you could set it up in advance. The alarm voltage only
check the supply voltage, but not change it . Take the example as following : if the supply
voltage is 110v, and the warning voltage is 240v, it won't change your supply voltage, while if
your supply voltage come to 240v or more, if will alarms . But if the supply voltage is much
higher than the Alarm voltage , it will alarm all the time, but it is in the safe range .
l
Kind advice: if your local supply voltage is 110v, you could set the Alarm voltage in 120v, if the
local supply is 220v, please set it in 240v.
l
Diverse control range: such as mono control device, Line control with external remote control, it
can control any Complex power system .
Picture of the Front Panel and the detailed description are as following
1
2
10
Picture of the Rear Panel and the detailed description are as following :
3
3
5
4
18
8
6
13
14 15 16 17
7
11 12
9
19
5.Changing password
A.Authentication
In the interface showing OFF and ON, just please press the UP and DOWN simultaneously and
then loosen them and press the button OK. Now, you enter into the Authentication.
The first lamp flashing "0" all the time and the "change password " button also flashing , now you
can change the original code one by one . When the last number being input , it will be verified
automatically. If the original code being put wrong , all the lamps will flash three times, and it will
return again . if not the three lamps are flashing in turns, it means that you can input the new code
into the interface now .
B.Inputing new code
The first lamp flashing with "0" , and the second lamp is on all the time and showing "modify
password", now ,you can enter into new code one by one .
C.Input new code again
The first digital lamp showing "0", the second is on all the time and showing "confirm password". If
it is flashing , it means you have been in the new code interface, when you input the new code , it
will check the new code automatically . if it is input wrong , all the lamps will be on or off. And
return to the initial interface automatically. If both of the code are input the same, the lamps will
be on and off one by one. And it will be saved and return into the OFF and OR interface.
6.Link Connect
Before you open the air switch , please connect the links all well (RJ-45) , and then open all the air
switch of the links (AFPD-022) , input the verification code , and now , the system enter into the
new cascade interface .
A.Master
when multi- device linked, after the device powered on and pass the password, the
software cognizance the first device was master, press the master main switch button will
turn on or turn off the device. Only master switch is enable .other buttons are disable.
B.Slaves
When multi- device linked, after the device powered on and pass the password, the
software cognizance what belong to the master slaves . and all the slaves being controlled by the
master, also all the buttons are disable.
1.White orange
2 . orange
5. White green
6. Green
1-1
2-2
3-3
4-4
5-5
6-6
7-7
8-8
3. White blue
4. Blue
7. white brown
8. Brown
8