Active Secure CLiK64-T-P3 Instruções para o utilizador - Página 2

Procurar online ou descarregar pdf Instruções para o utilizador para Controlo remoto Active Secure CLiK64-T-P3. Active Secure CLiK64-T-P3 4 páginas. Car security alarm remote

Imprimir página
CLiK64-T Battery Replacement
1.
Carefully pry open the case with a flat edge tool or
screwdriver from the key ring corner.
2.
Make sure the case is laid flat on the table upside down.
3.
Push the coin shaped battery out of its holder and replace
it with a CR2032 battery being careful to place the "+"
positive side on top.
4.
DO NOT install the batteries backwards. The device will be
damaged.
5.
Snap close the case
6.
Test the transmitter and look for the red LED light to flash
when a button is pressed for one second.
2