Gage Bilt GB2600 Manual de instruções original - Página 16
Procurar online ou descarregar pdf Manual de instruções original para Ferramenta eléctrica Gage Bilt GB2600. Gage Bilt GB2600 16 páginas. Installation tool
Imprimir página
Image may not reflect actual tool
Image may not reflect actual tool
TEFLON® IS A REGISTERED TRADEMARK OF E.I. DUPONT DE NEMOURS & CO. LUBRIPLATE® IS A REGISTERED TRADEMARK OF FISKE BROTHERS REFINING CO. SLIC-TITE® IS A REGISTERED
TRADEMARK OF LA-CO INDUSTRIES INC. LOCTITE® IS A REGISTERED TRADEMARK OF HENKEL CORPORATION. HUCK® IS A REGISTERED TRADEMARK OF ARCONIC INC.
GB2600 / GB2600A INTALLATION TOOL S/N: 1001 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS
Power Units Available
(Sold Separately)
GB940 POWER UNIT
The GB940 Hydraulic Power Unit is a light-weight, portable power
source designed to operate on a wide range of hydraulic installation
tools. The unit is electrically powered and delivers up to 10,000 psi (689.5
bar) working pressure with simple adjustable hydraulic outputs. The 24 volt
remote control circuit, in the installation equipment, controls the pump
output directional valve. The GB940 Hydraulic Power Unit is available in
115 volt or 230* volt, single phase, alternating current. Output pressures
as shipped are: PULL 5400-5700 psi, RETURN 2200-2400 psi.
The GB940 Hydraulic Power Unit is available separately or in kits in-
cluding hydraulic quick-disconnect couplers, electrical connectors and
hose cord kits in various lengths.
GB940-12 includes the GB940 and 12 ft. (3.7 m) Hose Kit, part #940701
GB940-26 includes the GB940 and 26 ft. (7.9 m) Hose Kit, part #940705
GB940-38 includes the GB940 and 38 ft. (11.6 m) Hose Kit, part #940709
GB940-52 includes the GB940 and 52 ft. (15.8 m) Hose Kit, part #940714
GB910 POWERUNIT
The GB910 Hydraulic Power Unit is a portable power source designed to oper-
ate a wide range of hydraulic installation tools. The unit air powered, air actuated
and delivers up to 10,000 psi (689.5 bar) working pressure. The actuator on
the installation tool remotely controls the hydraulic oil directional flow. The
unit consists of a two position air hydraulic pump, four way control valve and
relief valve mounted on the reservoir.
The GB910 Hydraulic Power Unit is available separately or in kits including
hydraulic quick-disconnect couplers, air connectors, air lines and hydraulic
hoses in various lengths.
GB910-12 includes the GB910 and 12 ft. (3.7 m) Hose Kit-Air, part #910701
GB910-26 includes the GB910 and 26 ft. (7.9 m) Hose Kit-Air, part #910705
GB910-38 includes the GB910 and 38 ft. (11.6 m) Hose Kit-Air, part #910709
GB910-52 includes the GB910 and 52 ft. (15.8 m) Hose Kit-Air, part #910714
16
REV 1/20