Gage Bilt GB715 Manual de instalação - Página 8
Procurar online ou descarregar pdf Manual de instalação para Ferramenta eléctrica Gage Bilt GB715. Gage Bilt GB715 17 páginas.
Também para Gage Bilt GB715: Manual de instruções original (20 páginas)
Imprimir página
WARNING:
Only qualified and trained operators should install, adjust or use the assembly power tool for non-threaded
mechanical fasteners.
WARNING:
Operator
WARNING:
It is required that eye protection and hearing protection be worn during operation.
WARNING:
The users or the user's employer should assess specific risks that could be present as a result after each use
based on their application.
● Be sure there is adequate clearance for tool and operator's hands before proceeding. Keep fingers clear of
any moving parts. Keep fingers clear from fasteners and installed materials. Severe personal injury may result.
● Verify that hydraulic hose fittings and couplings, air and electrical connections are secure.
● Verify
●
Ensure that there are no electrical cables, gas pipes, etc., which can cause a hazard if damaged by the tool
●
Do not use as a hammer to force fasteners into holes or otherwise abuse tool
WARNING:
Ensure air hose is securely connected to avoid possible hose whipping (Air Actuated Tools only).
WARNING:
Do not pull rivet in the air. Personal injury from fastener ejecting may occur.
WARNING:
Do not carry from hoses or use as a hammer.
WARNING:
Do not use in explosive atmosphere.
CAUTION:
Do not use beyond the design intent.
GB715 S/N: 1242 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
HOW TO USE THE GB715
MUST
read and understand all warnings and cautions.
the airlines and/or hydraulic hoses are not a trip hazard.
1. Insert fastener through the work piece.
2. Insert tool onto fastener.
3. Press actuator to start cycle. Continue to press until
fastener breaks.
4. Release actuator as soon as fastener breaks.
5. Repeat steps 1-5.
Images may not reflect actual tool or fastener
Blind Rivets
8
.
REV. 2/16
.