Gage Bilt GB743 Manual de instalação - Página 9

Procurar online ou descarregar pdf Manual de instalação para Ferramenta eléctrica Gage Bilt GB743. Gage Bilt GB743 13 páginas.

HEAD

WARNING:

Dispose of hydraulic oil in accordance with all environmental regulations applicable in your area.

Remove nose assembly from tool before attempting disassembly of head assembly.

Remove end cap (743214). Push against threaded end of piston (743407) to slide it out of head cylinder assy (743108). Be careful not

to damage threads or cause burrs on polished piston (743407) surface.

The re-assembly sequence is the opposite of disassembly. (See Filling and Bleeding instructions.) Apply Loctite® #242 and torque the

four button-head cap screws (402479) uniformly to 40 inch lbs. to prevent leakage around the gasket (704129).

743108

HEAD CYLINDER ASSY

S/N: 2269 AND ABOVE

PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

SEAL IN POLYSEAL

MUST FACE IN THIS

DIRECTION

S834 - O'RING

401089 - BACK-UP RING

S834 - O'RING

S572 - STAT-O-SEAL

402482

BUTTON HEAD CAP SCREW

400792 - O'RING

A-1135 - POLYSEAL

743407 - PISTON

200232 - DEFLECTOR

743214 - END CAP

400792 - O'RING

S829 - O'RING

REV. 10/14