Gage Bilt GB751 Manual de instalação - Página 9
Procurar online ou descarregar pdf Manual de instalação para Ferramenta eléctrica Gage Bilt GB751. Gage Bilt GB751 13 páginas.
Imprimir página
HEAD
Remove nose assembly and adapter from tool before attempting disassembly of head assy.
Remove end cap (703114). Push against threaded end of piston (751307) to slide it out of head cylinder assy (703109). Be careful not
to damage threads or cause burrs on polished piston (751307) surface.
WARNING:
Dispose of Hydraulic Oil in accordance with all environmental regulations applicable in your area.
The re-assembly sequence is the opposite of disassembly. (See Filling and Bleeding instructions.) Apply Loctite® #242 and torque
the button head cap screws (A-928) uniformly to 40 inch lbs. to prevent leakage around the gasket (704129).
S/N: 1324 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
9
6/11 REV 10/14