Gage Bilt GB734SHV Manual - Página 8

Procurar online ou descarregar pdf Manual para Ferramentas de rebitar Gage Bilt GB734SHV. Gage Bilt GB734SHV 13 páginas. Installation tool

Imprimir página

HEAD

WARNING:

Dispose of Hydraulic Oil in accordance with applicable regulations.

Remove nose assy from tool before attempting disassembly of head cylinder assy.

Remove end cap (734111-1). Push against threaded end of piston (734107) to slide it out of head cylinder assy (734104). Be careful not

to damage threads or cause burrs on polished piston (734107) surface.

The re-assembly sequence is the opposite of disassembly. (See Filling and Bleeding instructions.) Apply Loctite #242 and torque the

four socket-head cap screws (400061) uniformly to 40 inch lbs. to prevent leakage around the gasket (704129).

402482 - BUTTON HEAD

CAP SCREW

S572 - STAT-O-SEAL

734104 - HEAD CYLINDER ASSY

S832 - O'RING

704129 - GASKET

700323 - HANDLE-SPLIT

704312

ACTUATOR LEVER ASSY

704130 - AIR ACTUATOR ASSY

S1181 - BARBED FITTING

A-144 - HOSE CLAMP

204304 - SWIVEL ASSY

(INCLUDES 401080 & 403764)

704311 - AIR LINE

402482 - BUTT0N HEAD SOCKET SCREW

S834 - O'RING

401089 - BACK-UP RING

S834 - O'RING

401816 - PLUG

A-663 - HANGER

400061 - SOCKET HEAD CAP SCREW

A-317 - HYDRAULIC HOSE

S572 - STAT-O-SEAL

744303 - MANIFOLD - HANDLE

402482 - BUTT0N HEAD SOCKET SCREW

401112 - BACK-UP RING

A-289 - O'RING

734107 - PISTON

401080 - BACK-UP RING

703560 - HOSE GUARD (NOT SHOWN)

A-144 - HOSE CLAMP

S1181 - BARBED FITTING

S572 - STAT-O-SEAL

734111-1 - END CAP

400790 - O'RING

S829 - O'RING

204304 - SWIVEL ASSEMBLY

403764 - O'RING

3/12 REV 9/14