5th Wheel M2 Manual do utilizador - Página 15
Procurar online ou descarregar pdf Manual do utilizador para Scooter 5th Wheel M2. 5th Wheel M2 18 páginas.
Também para 5th Wheel M2: Manual de instruções de montagem (19 páginas)
Imprimir página
12 Care & Maintenance
Lubrication
For maintenance, add a small amount of white grease or lubricant to the folded part once every six months.
Check the scooter once every three months for screw loosening. Tighten the loose screw.
Battery
When you get the electric scooter for the first time, please fully charge the battery before using the scooter.
The battery can be charged at any time to ensure the power supply. It will not be damaged during charging.
When not in use, the battery needs to be charged once every three months.
*Laboratory data
Storage and daily maintenance
Avoid leaving scooter under direct sunlight or in severly humind places for a long time.
Keep the scooter clean.
Regularly check the tightening of the various bolted elements, in particular the wheel axles, the folding system, the
steering system and the brake shaft.
Cleaning Recommendations
If you see stains on the scooter's body, wipe them off with a damp cloth. If the stains won't scrub off, put on some
toothpaste, and brush them with a toothbrush, then wipe them off with a damp cloth.
Do not clean the scooter with alcohol, gasoline, kerosene or other corrosive and volatile chemical solvents to
prevent dire damage. Do not wash the scooter with a high-pressure water spray. During cleaning, make sure that the
scooter's turned off, the charging cable is unplugged, and the rubber flap is closed as water leakage may result in
electric shock or other major problems.
Routine Inspection
1. Before riding, please confirm the folding mechanism is locked;
2. Please check whether the tires are badly worn. Please contact the local authorized dealer if they needs to be replaced;
3. Please check whether the wear condition of the brake pad affects the use of the brake system. If so, please
contact the local authorized dealer to deal with the problem；
4. The screws used in this product are self-tightened screws. Please note that the effect may be gone after several
times of tightening.
26
13 Troubleshooting
If there is any problem with the scooter, please try to solve it in the following ways.
1.The display screen is black.
Cause: The exposure time in the sun is too
long.
Solution: Please place the scooter in a dark
environment for a period of time and it will
return to normal.
3.The displayed value is dim.
Cause: The battery connection is loose, or there
is no battery power left.
Solution: Turn off the scooter and restart it. If the
problem remains, please contact the customer
service via
https://5thwheel.afterservice.vip
5.The screw at the junction of the handlebar
and the stem is loose.
Cause: The loose screw is a spare locking screw,
which is loose by default in the factory setting,
without affecting normal use.
Solution: The user can adjust and lock by the screw if
necessary.
As shown in the figure
The mechanical vibrations transmitted by the Electric Scooter
are less than 2.5 m/s2. The uncertainty of measurement is.
2.The value is inconsistent with the actual value.
Cause: The parameter setting is incorrect or missing.
Solution: Long press the Power switch to shut down
the scooter, and then short press the Power switch to
restart it.
4.The product cannot work normally.
a. Please make sure that it is powered on.
b. Check whether there is battery power left by viewing
the display screen.
c. Check whether the left brake and rear brake are in
place.
d. Check whether all ports and power cables are
connected accurately.
If all the above steps are checked and the product still
cannot work normally, please contact us via
https://5thwheel.afterservice.vip
6.Braking Distance 2.5m
The braking distance of this product is measured under
the conditions of 75kg loading, 24℃ temperature,
55%-65% humidity, 2.9 bar tire pressure and asphalt
pavement.
27