Dyna-Glo RMC-11-C7 Manual do Proprietário - Página 11

Procurar online ou descarregar pdf Manual do Proprietário para Aquecedor Dyna-Glo RMC-11-C7. Dyna-Glo RMC-11-C7 16 páginas. Portable kerosene-heater

. Remove the screw on the wind

cover and remove the wind cover.

. Lift the wick holder assembly

straight up and remove form the

burner tank.

. Replacement the wick holder

assembly in the burner tank.

Rotate 90 degrees left and

right as well as up and down

until the wick slides freely.

Check to see that gasket is

still in place on the burner

tank.

. Remove 4 wing nuts with flat

blade screw driver.

. Remove the wick from the

holder by folding it toward the

center loosening it from the

sharp metal teeth on the inner

surface of the inner surface of

the holder, and slide it out.

. Insert the pinion at the other

end of the wick control shaft

into the top portion of the rack

of the wick holder.

This step can be easily carried

out if the wick holder is raised.

NEVER LEAVE THE HEATER

UNATTENDED WHILE BURNING!

. Lift the wick adjuster assembly

straight up and away from the

heater.

. The black line on the outside of

the wick should match the top

edge of the holder.

Then press it against the teeth

inside the holder to obtain a firm

grip.

. Slide the wick adjuster

assembly down the draft tuve.

Position the adjuster shaft to

the front of the heater.