Dawnco STARLOOK- D Manual - Página 8

Procurar online ou descarregar pdf Manual para Unidade de distribuição de energia Dawnco STARLOOK- D. Dawnco STARLOOK- D 16 páginas.

Imprimir página

Other Digital functions:

1. Search +

2. Search –

3. Memory

4. DiSEqC

0. 13/18V

#. 22kHz

DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • [email protected]

Automatically search for the next digital transponder higher in

frequency. Searching is displayed at the bottom of the monitor.

Automatically search for the next digital transponder lower in

frequency. Searching is displayed at the bottom of the monitor.

For storing digital transponders (digital channels - frequencies).

Tune in the "right" frequency before entering this function

(ex. 1650 MHz).

Enter the Memory function (button nr 3) and push Save (button nr 1).

The instrumentet asks: -"SAVE. ARE YOU SURE ?"

Check that the Memoryposition is the right one (displayed at the right

bottom on the monitor). If not, chose a new one with the

knob (0-99). Free positions are named: Pos free

After selecting a position, push button nr 1 (YES).

Notice that even the preselected 13V/18V, 22 kHz on/off will be

memorized.

Load a memory-position by pushing the control-button –"Memory"

will appear on top of the LCD and a memory-position will be

shown in the bottom of the LCD-display.

Step between the stored memory-positions with the knob.

Text-editor:

When the channel (frequency) is saved, the Text-editor appears on the

monitor which makes it possible to enter a name for that memory-

position (ex. Digital).

Use the knob to select the first letter (ex. D) and save it with the control-

button. Move to the next letter (ex. i) and so on.

If a mistake is made and wrong letter is saved, simply correct by

pushing button nr 1 (Delete) and the cursor will jump one position

backward.

Chose between the different DiSEqC commands by using the buttons

on the side of the instrument.

Submenu 7 (SWx) shows the extended DiSEqC-commands

(DiSEqC 1.1).

Submenu 8 (Motor) shows the command-list for DiSEqC actuator-

control (DiSEqC 1.2).

Even 13/18V and 22 kHz can be adjusted under the DiSEqC-menu.

Selection of 13V alt. 18V. Chosed position is displayed at the top of the

LCD-display.

22 kHz on/off. Chosed position is displayed at the

top of the LCD-display.

(7)