Frigidaire 7 Manual de instruções de instalação - Página 6

Procurar online ou descarregar pdf Manual de instruções de instalação para Gamas Frigidaire 7. Frigidaire 7 8 páginas. 30" gas range venturi models with electric ignition

Frigidaire 7 Manual de instruções de instalação
5. Read these
electrical
connection
details
first
then connect
electricity
to range.
Before
servicing,
disconnect
electrical
supply at circuit
breaker, fuse or power cord.
Electric Requirements: A dedicated, properly grounded and
polarized branch circuit protected by a 15 amp. circuit breaker
or time delay fuse. See serial plate for proper voltage.
Grounding Instructions
The power cord of this appliance is equipped with a
3-prong (grounding) plug which mates with a standard
3-prong grounding wall receptacle to minimize the possibility
of electric shock hazard from this appliance.
The customer
should have the wall receptacle and circuit checked by a
qualified electrician to make sure the receptacle is properly
grounded and polarized.
Extension Cord Precautions:
Because of potential safety hazards under certain conditions,
we strongly recommend
against the use of any extension
cord. However, if you still elect to use an extension cord, it is
absolutely necessary that it be a UL listed 3-wire grounding
type appliance extension cord and that the current carrying
rating of the cord in amperes be equivalent to or greater than
the branch circuit rating. Such extension cords are obtainable
through your local service organization.
PLEASE READ CAREFULLY7
For personal
safety, this product must be properly grounded.
Preferred
Method
L
f
J
J
Grounding
d
Type
7
Wall
..
Receptacle
if Do Not, Under
-_"_
!_k_
Any Circumstances'
I
_Cut,
Remove,
|
pm_
orBypassthe
J
Grounding
Prong.j/
Power Supply
Cord with
3=Prong
Grounding
Plug
Where a standard two-prong wall receptacle is encountered,
it is the personal responsibility and obligation of the customer
to have it replaced with a properly grounded three-prong wall
receptacle.
DO NOT, UNDERANYCIRCUMSTANCES,
CUTOR REMOVE
THE THIRD (GROUND) PRONG FROM THE POWER CORD.