Frigidaire 79071190100 Manual de instruções de instalação - Página 3

Procurar online ou descarregar pdf Manual de instruções de instalação para Gamas Frigidaire 79071190100. Frigidaire 79071190100 10 páginas. 30" gas range with electric ignition or standing pilot

Imprimir página

Before Starting

Tools You Will Need

For leveling legs and Anti-Tip Bracket:

•

Adjustable wrench or channel lock pliers

•

5/16" Nutdriver or Flat Head Screw Driver

Electric Drill & 1/8" Diameter Drill Bit (5/32" Masonry Drill

Bit if installing in concrete)

For gas supply connection:

Pipe wrench

For burner flame adjustment:

•

Phillipshead _

and

blade-type screwdrivers

For gas conversion (LP/Propane or Natural):

Open end wrench - 1/2"

Additional Materials You Will Need

•

Gas line shut-offvalve L_

•

Pipe joint sealant that resists action of LP/Propane gas

A new flexible metal appliance conduit(1/2" NPT x 3/4"

or 1/2" I.D.) mustbedesign certifiedby CSA International.

Because solid pipe restricts moving the range we

recommend using a new flexible conduit (4 to 5 foot

length) for each new installation and additional

reinstallations.

a_B

•

Always usethe (2) new flare union adapters (1/2" NPT x

3/4" or 1/2" I.D.) supplied with the new flexible appliance

conduit for connection of the range.

Normal Installation Steps

Anti-Tip

Bracket

Installation

Instructions

Important Safety Warning

To reduce the risk of tipping ofthe range, the range must be

securedto the floor by properly installedanti-tipbracket and

screws packed with the range. Failure to installthe anti-tip

bracket will allowthe range to tip over if excessive weight is

placed on an open door or if a child climbsupon it. Serious

injurymight result from spilled hot liquids or from the range

itself.

If range is ever moved to a different location, the anti-tip

brackets must also be moved and installed with the range.

Instructionsare provided for installation in wood or cement

fastened toeitherthe floor orwall. When installedtothe wall,

make surethat screwscompletely penetratedry wall and are

secured inwood or metal. When fastening to thefloor orwall,

be sure that screws do not penetrate electrical wiring or

plumbing.

Locate the Bracket Using the Template- (Bracketmay

be located on eitherthe leftor rightside ofthe range. Use

the informationbelowto locate the bracket if template is

notavailable). Mark thefloororwall where leftor rightside

ofthe range willbe located. Ifrear of rangeis againstthe

wall or nofurther than 1-1/4" from wall when installed,you

may use the wall or floor mount method. If molding is

installedanddoes not allowthe bracket to fit flush against

the wall,removemoldingor mount brackettithe floor. For

wall mount, locate the bracket byplacingthe back edge

ofthe template against the rear wall and the side edge of

template on the mark made referencing the side of the

range. Placebracket on topoftemplate and marklocation

ofthe screw holesin wall. If rear of range isfurther than

1-1/4" from the wall when installed, attach bracketto the

floor. Forfloor mount, locate the bracket by placingback

edge of the template where the rear of the range will be

located. Mark the location of the screw holes, shown in

template.

Drill Pilot Holes and Fasten Bracket - Drill a 1/8" pilot

hole where screws are to be located. If bracket isto be

mountedtothe wall, drillpilotholeat an approximate20 °

downwardangle. Ifbracket isto be mountedto masonry

or ceramic floors,drilla 5/32" pilot hole 1-3/4" deep. The

screws provided may be used in wood or concrete

material. Use a 5/16" nut-driveror flat head screwdriver

to secure the bracket in place.

FASTEN BRACKET (WALL ORFLOOR M OUNTING)

--I_1

1<--1-1/4" Max.

Levelinc

-Wall Mount

[

Floor Moun

_Bracket

FASTEN BRACKET

(FLOOR MOUNTING

ONLY

Leveling Leg

_ _

FIoorl Mount

j_F_

Lnti-Tip

Bracket

More Than

1-1/4"

"'-- Wall