Dawnway UVC100 Manual do utilizador - Página 3

Procurar online ou descarregar pdf Manual do utilizador para Produto de canalização Dawnway UVC100. Dawnway UVC100 6 páginas. Uv-c led disinfection faucet, sgs test-approved disinfection rate 99.9%

Imprimir página

7. Connect the black plug (6) of the adapter with the black socket (4-1) of the power cable,

and connects to power supply. When the power cord is plugged into the power supply, the

red and blue lights will flash once indicate that the faucet function is in normal standby

state.

8. Turn on the water supply.

9. Do not disassemble the water flow switch (5) unless necessary, once disassembled, please

ensure the arrow tip(5-2) of the water flow switch (5-1) is pointing upward, and the green

plug (4-2)of the power cable(4) and the green socket (5-1) of the water flow switch(5) are

connected.

Light Indicator

1. When the power cord is plugged into the power supply, the red

and blue lights will flash once that means work.

2. Turn the faucet on, if the blue light is on, it means UVC module

work (disinfection in process).

3. Red light on : It means UVC module is overheating, please refer

to the troubleshooting guide.

4. Both red, blue lights on : It means UVC module failure, please

refer to the troubleshooting guide.

5. Turn the faucet off, the light indicator goes off.

Countertop

(9)

Lock Nut(8)

Horseshoe

Gasket(2)

Hex Lock Nut(3)

Waterproof

O-ring

(7)

( Fig. 4 )