66audio REVOLUTION Manual do utilizador - Página 6

Procurar online ou descarregar pdf Manual do utilizador para Auscultadores 66audio REVOLUTION. 66audio REVOLUTION 16 páginas.

PAI R ING

( S T E P BY

S T E P)

Pairing (Detailed Step-by-Step Instructions)

Make sure your REVOLUTION is powered on.

Keep the REVOLUTION and your device within 10 feet

while pairing.

Place the REVOLUTION into Pair Mode by pressing and

holding the Pair button for 3 seconds until the status LED

begins to flash both blue and red.

In your device settings, begin searching/scanning for

Bluetooth devices.

The REVOLUTION will appear in the list of available

devices as "66 REVOLUTION".

Tap the REVOLUTION name to connect and pair.

You are now paired and the status LED will intermittently

flash blue to indicate successful connection. You will also

hear an audible from the headphones.

•

If pairing is not successful, switch off the REVOLUTION by sliding the Power

button up and then re-pair using to the steps outlined above.

•

After pairing is successful, paired devices will remember each other unless

pairing information is deleted. There is no need to pair again.

•

When turned on, the REVOLUTION will automatically connect with the most

recent paired device. If you want to pair with other Bluetooth devices, switch off

the Bluetooth function of your current paired device, then pair the REVOLUTION

with the new Bluetooth device according to the steps outlined above.