Gaggenau CE 481 Manual de instruções - Página 9

Procurar online ou descarregar pdf Manual de instruções para Placa de fogão Gaggenau CE 481. Gaggenau CE 481 20 páginas. Glass ceramic cooktop

Imprimir página

Setting the cooktop

This section familiarises you with how to make

settings on your cooktop. The table contains cooking

methods and examples for the different heat settings.

Switching the cooktop on and off

The main switch is used to switch the cooktop on and

off.

To switch on: touch the # symbol. A signal sounds.

The lamp above the main switch and the ‹ displays

lights up. The cooktop is ready for use.

To switch off: touch the # symbol until the light above

the main switch goes out. All cooking zones are

switched off. The residual heat indicator remains on

until the cooking zones have cooled down sufficiently.

Notes

‒

The cooktop switches off automatically if all

cooking zones have been switched off for more

than 20 seconds.

‒

The settings remain stored for 5 seconds after the

cooktop has been switched off. If you switch it on

again during this time, the cooktop will operate

using the previously stored settings.

Setting the heat setting

The hob must be switched on with the main switch.

Each cooking zone has 9 heat settings with

intermediate settings in between. A dot appears next

to the heat setting display to indicate an intermediate

setting.

Heat setting 1 = lowest output

Heat setting 9 = highest output

Select the cooking zone. Do this by pushing the

magnetic knob towards the required cooking zone

symbol.

Centre the magnetic knob on the twistpad again.

Within the next 5 seconds, turn the magnetic

knob until the desired heat setting appears in the

heat setting display.

A signal sounds to confirm the setting after a few

seconds.

Changing the heat setting

Select the cooking zone. Use the magnetic knob to set

the required heat setting.

Switching off the cooking zone

Select the cooking zone. Use the magnetic knob to set

it to 0. The cooking zone switches off. After approx. 5

seconds, the residual heat indicator appears.