Hi-Force IP Series Manual de Instruções - Página 3
Procurar online ou descarregar pdf Manual de Instruções para Chave de impacto Hi-Force IP Series. Hi-Force IP Series 10 páginas. Pneumatic impact wrenches
Imprimir página
Upon receipt of the product, visually inspect the item for any evidence of shipping damage. Please note:
the warranty does not cover shipping damage. Notify the courier immediately if shipping damage is found
and refrain from putting the product into service. The carrier is responsible for repair and replacement costs
resulting from damage that occurred in transit.
2.1 Introduction
Read and follow all the instructions and safety warnings carefully before handling, installation or
use of any torque equipment. Failure to do so could lead to equipment damage, equipment failure,
personal injury or even death. Hi-Force will not be held responsible for any damage to the
equipment, injury or death resulting from the unsafe use of, lack of maintenance to, or incorrect operation
of the product. If in doubt on the correct use of any Hi-Force equipment, contact your nearest Hi-Force office
or distributor. Only qualified personnel should be allowed to operate torque equipment. If an operator has
not been trained on torque equipment and its safe usage, consult your local Hi-Force sales office or
distributor who can offer training courses for operators.
2.2 Work Area Safety
Keep work areas clean and well lit. Cluttered spaces and inadequate lighting can result in
unnecessary accidents.
Keep unauthorised persons at a safe distance from the task site.
NEVER use the tools in the presence of inflammable liquids, gases or material.
DO NOT use the tools in potentially explosive atmospheres (ATEX) this tool is NOT ATEX approved.
2.3 General Safety Precautions
When operating any torque equipment, all operators should ensure that all necessary personal
protective equipment (PPE) is worn, as specified by their employer. Steel toe-cap safety shoes,
safety glasses / visor and protective gloves should be worn at all times. All relevant risk assessments
should be completed before the use of the equipment.
Immediately replace any worn or damaged parts using genuine Hi-Force parts only.
DO NOT use any toque equipment if you are under the influence of alcohol, drugs or medication.
Lack of attention whilst operating torque tools can result in personal injury or death.
1.0 Inspection upon Receipt
2.0 Safety Precautions
Failure to observe and obey the following safety precautions could result
in property damage, significant personal injury or death;
Operating Instruction Manual:
OM-IP-01
3
Serial Numbers:
BR2198