Gaggenau VG 231 334 SG Manual de instruções - Página 7

Procurar online ou descarregar pdf Manual de instruções para Placa de fogão Gaggenau VG 231 334 SG. Gaggenau VG 231 334 SG 12 páginas. Gas wok
Também para Gaggenau VG 231 334 SG: Instruções de instalação (4 páginas)

Gaggenau VG 231 334 SG Manual de instruções

Operation

The markings on the control knob show the setting
between high and low heat. The flame setting is
infinitely variable between high and low heat.
Notes
Only light a burner if all pan supports and burner
parts are properly assembled.
Make sure the burners and ignition sparkers are
clean and dry.
Fully press down the control knob and keep it
pressed, then turn it to the required position.
After igniting, keep the control knob pressed for
around 2 to 4 seconds more. The thermal sensor
which controls the gas flow must be heated
before the knob can be released.
If the flame should not ignite within 2 to 4
seconds, turn the control knob further to the left
to the low heat position and then back to the high
heat position after ignition. It is often faster to
ignite the burner in the low heat position because
the various gases have a differing ignition
response.
Only use the recommended accessories. Do not
cover the stainless steel cooktop base (e.g. with
aluminium foil).

Switching on automatically

Your cooktop features ignition sparkers for automatic
ignition.
1
Place a suitable pot or pan on the burner.
2
Fully press down the corresponding control knob
and turn it anticlockwise to the ignition position
§
. The burner lights automatically.
3
Keep the control knob pressed for a few seconds
after ignition. Then turn it left to the required
setting.
The flame size can be set continuously between high
and low by slowly turning the control knob.

Switching on manually

During a power cut you can ignite the burner manually.
1
Place a suitable pot or pan on the burner.
2
Press the control knob and turn it anticlockwise
to the ignition position
pressed.
3
Use a gas lighter or a match to ignite the burner.
Keep the control knob pressed for a few seconds
after ignition. Then turn it left to the required
setting.

Switching off

Turn the corresponding control knob clockwise to the
OFF position.

Thermoelectric flame monitoring

For your safety, this cooktop features thermoelectric
flame monitoring. This prevents gas escaping, if a
burner accidentally goes off during use (for example
from a draught).
Should a burner accidentally go off during use, turn
the control knob to the OFF position and wait at least
30 seconds before re-igniting the burner.
§
. Keep the control knob
7