Daxten SCOUTusb Manual de instalação - Página 5

Procurar online ou descarregar pdf Manual de instalação para Interruptor Daxten SCOUTusb. Daxten SCOUTusb 7 páginas. Soho kvm switch
Também para Daxten SCOUTusb: Brochura (2 páginas)

Imprimir página

Keyboard Hot Key commands

To send Hot Key commands to the SCOUTusb switch, press and release Ctrl

seconds. Press a command key for the desired effect. The following commands are supported:

First Key

Second Key

Ctrl

Note: Directly select Channel or Hub. For example, if you press:

Ctrl

Ctrl C 2, means the Channel on the port 2 not the Hub

Ctrl

Ctrl H 2, means the Hub on the port 2 not the Channel

Ctrl

Ctrl A 2, means all, Channel and Hub

In Auto-Scan mode, the image shown on the monitor will automatically switch to the next computer.

The delay is user definable (see Table above). After the last computer has been shown, the first

computer will be shown again.

Note: In this mode there is no mouse or keyboard control.

Press any key to exit the Auto-Scan mode. The SCOUTusb switch will stop at the last PC shown.

The Hot Key sequence can be changed if required. To change from the factory default of Ctrl

please use the following sequence:

[OLD HOT KEY] [NEW HOT KEY]

Ctrl

for example:

New Hot Key: Scroll Lock Scroll Lock

The following combinations are available for Hot Keys:

Ctrl

Ctrl (default)

Built-in 2-Port Hub

Attaching any USB device to the 2-Port hub, that device will be automatically switched as you

Switch PCs.

Command Key

C 1 , C 2 , C 3 or C 4

H 1 , H 2 , H 3 or H 4

A 1 , A 2 , A 3 or A 4

↑

↓

Ctrl

Scroll Lock Scroll Lock

Alt Alt

Scroll Lock Scroll Lock

Ctrl within 2

Command Result

Switches to the desired PC

Switches the hub to the desired PC

Switches all to the desired PC

Switch to previous PC

Switch to next PC

Toggle Sound ON / OFF

Toggle Auto-Scan mode ON / OFF

Shift

Ctrl,