Daxten VOYAGER IP - Manual do utilizador - Página 3
Procurar online ou descarregar pdf Manual do utilizador para Interruptor Daxten VOYAGER IP -. Daxten VOYAGER IP - 15 páginas.
Imprimir páginaVoyager IP
Introduction
The Voyager IP is a device that enables you to control your server over TCP/IP via LAN, WAN or
Internet connection, from any location.
Product Features
Bios level KVM control.
-
Control any server irrespective of the server status or network connectivity.
Web based control.
-
Web browser control of target server, from any location via standard secured IP
connection.
Multi user view mode.
-
Allows multiple users to simultaneous view a remote session. Remote control
between users with appropriate permissions.
Client Computer Requirements
The client computer requires Windows 2000 or later, with Internet Explorer 6.0 or later, 128bit
encryption support for a secured connection.
Default IP Address
The Voyager IP boots with DHCP enabled, it looks for IP address from a DHCP server on the network.
If no DHCP server is found, the Voyager IP is configured with a static IP address of 192.168.0.155
if a DHCP server becomes available later, the Voyager will pick up it‟s settings
Note:
from the DHCP Server. To keep the static IP Address, disable DHCP as explained on
page 4
You can identify the Voyager‟s IP address through the MAC address (see Label on the bottom of the
Voyager IP.
Logging On
Complete the initial setup via the web interface.
Open your Web browser.
Enter the Voyager‟s system IP address. (e.g.
the login page will appear.
Enter the Administrator user name and password.
The network configuration page opens.
Note:
the default Administrator User Name is admin the default password is admin
(both are lower case)
Voyager IP
https://192.168.0.155/config)
3
User Guide
and press enter,