Hi-Line ConSEP300 Manual de Instruções e Manutenção - Página 6
Procurar online ou descarregar pdf Manual de Instruções e Manutenção para Sistemas de filtragem de água Hi-Line ConSEP300. Hi-Line ConSEP300 15 páginas. Oil / water separator
Imprimir páginaWhile preparing a proper site for the installation of the separator, please take into account the
following requirements:
The separator must be protected from atmospheric agents and not directly exposed to
sun light.
A seating base flat and capable to hold the weight of the separator.
Ambient temperature complying with the nominal data of the separator.
Make sure to leave sufficient clearance around the separator for maintenance and/or
control operations.
3.3 ACTIVATION OF ConSEP100-750 AND REPLACEMENTE FILTER
KIT
Perform the following steps to correct installation.
1. If present, remove only the plastic bag of activated carbon (CF)
2. Put the activated carbon bag (CF) in a receptacle filled by clear water at least 8 h before connecting
the condensate drain.
3. Place foam (FM), as shown in photo, in the lid (LD) (activity #1); place activated carbon layer (CAF)
above the foam.
4. Models ConSep100 and ConSEP300 are provided by a carbon bag (CF) and a white pre-filter bag
(PF). Model Con SEP750 is provided by 2 carbon bags (CF) and a white pre-filter bag (PF). First
place activated the carbon bag or the carbon bags (CF) in separator body (BD) (activity #2), then
white pre-filter bag (PF), (activity #3).
6/15