Great Little Trading Lulworth Manual - Página 7
Procurar online ou descarregar pdf Manual para Mobiliário de interior Great Little Trading Lulworth. Great Little Trading Lulworth 15 páginas. Chest of drawers
Também para Great Little Trading Lulworth: Manual (7 páginas), Manual (13 páginas)
Imprimir página
STEP 6:
Insert 4x wooden dowels (#4) into the ends of panels (A
& B) as shown and then connect panel (E) to these ends.
Ensure that the grooved edge of panel (E) is facing the
floor and the metal hardware is facing outwards towards
the base of the unit.
When panel (E) is in place, insert 6x barrel nuts (#5) into
the holes on the side panels (A & B) ensuring the hole in
the nut is facing towards the base. Secure panel (E) with
6x hex bolts (#6) using the Allen key provided.
A
Hardware for Step 6:
4x #4 Wooden Dowels
6x #5 Barrel Nuts
6x #6 Hex Bolts (42mm)
#5
B
#4
#5
#4
#5
E
#4
#5
#6
#4
BASE
#6
#6
STEP 7:
Attach LH flat runner (#10) to panel (F) and RH flat runner (#11) to panel
(G) as shown ensuring that you are positioning the x6 screws (#8) through
the indicated holes.
When fixed in the correct position, the runner wheel will be next to the smaller set
of holes on the lower edge of the panels, at the opposite end of the panel to the
grooved edge and there will also be a gap between the front edge of the panel and
the start of the runner. If the front of runner (wheel) is level with the front edge of
the panel, it is in the wrong position.
Ensure the hardware is fully inserted for smooth drawer opening.
F
#6
#6
#6
G
7
#8
#11
#8
#8
Hardware for Step 7:
#8
#10
6x #8 Screws (3.5mm x 12mmL)
#8
F
1x #10 LH Flat Runner
1x #11 RH Flat Runner
G
#8