7-BIT Wicher CD32 Manual do utilizador - Página 2

Procurar online ou descarregar pdf Manual do utilizador para Armazenamento 7-BIT Wicher CD32. 7-BIT Wicher CD32 4 páginas.

Intended Use

Wicher CD32 has been designed for the Amiga CD32 line of computers and should be installed in

an expansion slot (e.g.

providing a similar functionality.

Set Contents

The complete set is composed of:



First Steps

In order to ensure the correct operation of the Wicher CD32 card, the (sold separately) SIMM72

RAM module should be installed in the memory slot located on the card. Wicher CD32 is

compatible with SIMM72 FPM/EDO modules of 1MB to 128MB capacity and 50/60 ns access

time. This allows the Amiga CD32 computer to support up to 11MB FAST RAM. Wicher CD32 by

default provides up to 8MB of AmigaOS-addressable FAST RAM (depending on the capacity of the

installed SIMM72 module). To activate the additional 3 MB RAM, one should install WicherCD32

software package and physically enable 16 MB memory support via the X2 jumper settings.

Next, the 2,5" hard drive or the CF-IDE44 / SD-IDE44 adapter can be attached to the (44-pin) IDE

connector located on the card.

SIMM72 Memory Module Configuration - X2

Jumper

Wicher CD32

CD32 Expansion Slot

Wicher CD32 expansion card (in a protective packaging)

User manual.

– sold separately) or any other expansion device

Position 0 – ON/OFF

Jumper installed – the card is active

Jumper removed – the card is inactive

Position 1 – RAS13 ON/OFF

Jumper installed – two-sided memory modules support

enabled

Jumper removed – two-sided memory modules support

disabled

Position 2 – 8/16MB

Jumper installed – support for up to 8 MB

Jumper removed – support for up to 16 MB