Great Little Trading L5017 Instruções de montagem - Página 5

Procurar online ou descarregar pdf Instruções de montagem para Mobiliário para bebés e crianças Great Little Trading L5017. Great Little Trading L5017 5 páginas. Animal chair, fox

Imprimir página

STEP 2:

Insert the end of the seat back (C) into the slot on the seat (A).

Take the bolt (#1) and insert into the hole visible from the back of the chair.

GB: If there seems to be an issue with the alignment of the holes on the seat back and the

seat and bolt will not go through the hole, please turn the head around and try again.

FR: S'il semble y avoir un problème avec l'alignement des trous sur le dossier du siège et le

siège et le boulon ne passeront pas par le trou, veuillez tourner la tête et essayerde nouveau.

DE: Wenn es ein Problem mit der Ausrichtung der Löcher an der Sitzlehne und Der Sitz und

die Schraube gehen nicht durch das Loch, bitte drehen Sie den Kopf um und versuchen Sie

es wieder.

ES: Si parece haber un problema con la alineación de los orificios en el respaldo del asiento

y el asiento y el perno no pasarán por el orificio, gire la cabeza e intente otra vez.

Thread the metal washer (#4) over the end of the bolt and follow with the nut (#3).

Nut to be attached to bolt metal end first.

When tightening the nut, hold it still with the spanner and use the Allen key to

tighten the bolt.

Ensure the nut/bolt fixing is

FULLY TIGHTENED.

Please check all fixtures

and fittings

regularly and tighten as

necessary.

Hardware for Step 2:

1x #1 Bolt

1x #4 Flat Washer

1x #3 Nut

STEP 3:

Your item is now ready to use.

Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.