Gaggenau AH 790 Manual de instruções de funcionamento e montagem - Página 17
Procurar online ou descarregar pdf Manual de instruções de funcionamento e montagem para Campânula de ventilação Gaggenau AH 790. Gaggenau AH 790 20 páginas. Extractor hood
Imprimir página
15 (
/
")
19
32
300
(11
310
(12
230
(9
270
448
(10
(17
5
/
")
8
(5
13
/
")
137
32
625
(24
5
/
")
8
min. 600 ( 2 4 " ) electric
mind. 600 Elektro
min. 670 ( 2 6
1
/
" ) gas
mind. 670 Gas
2
Fig. 18
Fig. 19
16
13
/
")
16
3
/
")
16
1
/
")
16
/
")
5
8
Proceed as follows:
Important: Before marking the securing holes,
make sure that no electricity or water lines or
other lines are laid at the drilling points in the wall.
Exhaust air operation:
– From the bottom edge of the hood, mark a center
line on the wall.
– With the aid of the drilling template, mark the
positions of the screws on the wall. Mark the
contour of the hook-in area. This will make it
easier to hook in the hood (Fig. 18).
– Pay attention to the minimum clearance of 600 mm /
24" for electric cookers and 670 mm / 26
gas cookers. The bottom edge of the template
corresponds to the bottom from edge of the hood.
– Using the drilling template, drill the 6 holes for
the hood (area I of the drilling template) and the
two holes for suspending the chimney (area II of
the drilling template). In the top two securing
holes for the hood, fix the two hooks e with the
countersunk screws d. Make sure that the hooks
lie flatly on the wall. In certain circumstances you
may have to countersink the drill holes. Fit the
included dowels a in the other drill holes.
Note: Pay attention to any special accessories that
you may have to fit.
– Screw on the retaining bracket for the chimney
paneling.
– Detach the grease filters.
– Unscrew the two black plates on the left and right
of the chimney.
– Hang the hood on the two hooks. Adjust the
suspended element with the recessed head
screw and align the hood using a spirit level
(Fig. 19).
1
/
" for
2