HI-Q TOOLS 60150700080 Manual de instruções - Página 4
Procurar online ou descarregar pdf Manual de instruções para Acessórios para motociclos HI-Q TOOLS 60150700080. HI-Q TOOLS 60150700080 10 páginas. Fork mounting (front)
Imprimir página
HI-Q TOOLS FORK MOUNTING STAND (FRONT)
Ord Nr. 60150700080
CONTENT
1 fork mounting stand front
2 castors incl. fi xing material
The HI-Q TOOLS fork mounting stand (front) simplifi es a lot of reparation and mounting
mounting on your two-wheeler. Modern motorcycles often have a high empty weight of
several hundred kilogramms. Therefore please use the HI-Q TOOLS fork mounting stand
(front) always with the greatest care in accordance to these operating instructions
and the manufacturer's specifications to avoid damage on your two-wheeler and
injuries on involved persons.
The HI-Q TOOLS fork mounting stand (front) is to use always together with a rear
mounting stand. Make sure you lift the rear of the motorcycle fi rst. Never use the
stand for other purposes.
ASSEMBLY
The self-locking nuts of the security screws have to be tightenend gently without tigh-
tening the profi le of the stand. You can use the motorcycle lift as soon as the fork sup-
ports are put into the front direction and a sure position is guaranteed.
USE
Before using the HI-Q TOOLS fork mounting stand (front) check if your motorcycle gene-
rally fulfi ls the conditions to be lifted by the HI-Q TOOLS fork mounting stand (front). Not
for models where the lower ends of the fork right and left are on very different heights.
The max. load capacity is 150 kg – therefore the total weight of the two-wheeler incl ac-
cessories may not exceed 300 kg. If the front wheel shall be demounted, the axle has to be
loosened before jacking up the motorcycle. The same is valid for other tightened boltings
on the two-wheeler. Never jack up the motorcycle alone – let yourself help by a second