Gaggenau AR401740 Manual de instruções de instalação - Página 3

Procurar online ou descarregar pdf Manual de instruções de instalação para Campânula de ventilação Gaggenau AR401740. Gaggenau AR401740 17 páginas. Outer wall fan

Imprimir página

Observe the ofﬁcial and statutory

regulations for the removal of exhaust

air (e.g. Landesbauordnungen).

If the extractor hood is operating in

exhaust-air mode at the same time as a

ﬂue-type heater (e.g. gas, oil or solid-fuel

heater, instantaneous water heater, boiler),

there must be an adequate air supply

which the ﬁreplace requires for combusti-

on.

Safe operation is possible if the partial

vacuum in the installation room of the ﬁre-

place does not exceed 4 Pa (0.04 mbar).

This can be achieved if the combustion air

is able to ﬂow through non-lockable ope-

nings, e.g. in doors, windows and in con-

junction with an air supply/air-intake wall

box or by other technical procedures such

as reciprocal interlocking.

If the air supply is inadequate, there is a

risk of poisoning caused by combustion

gases being drawn back into the room.

Note: When assessing the air supply,

always take into account the entire ventila-

tion system in the house. This rule does

not apply when using cooking appliances,

e.g. hob or gas cooker.

Do not attach the outer wall fan near

windows, doors or patios.

When attaching the outer wall fan,

ensure that

– residents and neighbours are not

disturbed by noise and odours,

– it is accessible for maintenance and

repairs.

Prior to installation

The plug-and-socket connections of

the electric cables must be located inside

the building.

Preparing the wall

RISK OF INJURY,

DAMAGE TO PROPERTY

Before drilling the holes for the designated

installation location, check for concealed

electrical cables and other lines.

K The wall must be level and vertical.

K The enclosed screws and wall plugs are

suitable for solid brickwork. Use the

appropriate fixing materials for other wall

structures (e.g. plaster board, porous

concrete, poroton bricks).

Ensure that the wall has adequate load

bearing capacity.

K Ensure that the depth of the drilled holes

corresponds with the length of the scr-

ews.

K Ensure that the wall plugs are secure.

Weight: 7,0 kg.

We reserve the right to construction changes within the

context of technical development.