Gaggenau AW 540-190/120 Manual de instruções de funcionamento e montagem - Página 11
Procurar online ou descarregar pdf Manual de instruções de funcionamento e montagem para Campânula de ventilação Gaggenau AW 540-190/120. Gaggenau AW 540-190/120 20 páginas.
Imprimir página
4. Cleaning and care
Fig. 13
Fig. 14
Cleaning the grease filters
The grease filter saturation display F flashes after
an operating time of 30 hours to you indicate to you
that you should clean the grease filter (see Fig. 3).
The grease filters can of course be cleaned at any
time, even if the grease filter saturation display has
not started to flash.
The stainless steel grease filters can be removed
easily for cleaning (see Fig. 13):
Disconnect the power supply (switch off the fuse).
Grip the grease filter handle and push the slide
towards the rear. Then pull the grease filter
downwards out of the holder; repeat the operation
for the other grease filters.
You can clean the stainless steel grease filters in a
dishwasher at a maximum temperature of 65°C,
where it should be supported vertically to allow
food or rinsing residues to drain off.
If possible, the inner parts of the housing should be
wiped out in hot rinsing water when replacing the
filters.
Caution:
when cleaning the inside of the housing, beware of
protruding parts.
After having cleaned them, re-insert the grease
filters in the wall extractor in reverse order.
Important:
the handles of both grease filters must be
visible after assembly.
Press the
F key to set the elapsed hours counter to
zero. Flashing of the indicating lamp goes off.
9