Gaggenau CE 491 Manual de instruções - Página 16
Procurar online ou descarregar pdf Manual de instruções para Hob Gaggenau CE 491. Gaggenau CE 491 20 páginas. Glass ceramic cooktop
Imprimir página
Options menu
In the options menu, you can adjust the following
functions for your cooktop:
▯
Activation
▯
Key tones
Display
Function
™‚
Activation
The activation is not activated when you switch on
the hob, and it can be activated.*
A The activation is activated when you switch on
the hob, and can be deactivated.
¯ When you switch on the hob, the last state that
was used is set.
™ƒ
Button tones
‹. Button tones off.
‚. Button tones on.*
™„
Child lock
‹. Child lock cannot be activated.*
‚. Child lock can be activated.
™...
Reset all values
š Values do not correspond to the factory setting.
™†
Selection time for selecting the cooking zone
£ Selection time 5 seconds.*
£. Endless selection time.
*Factory setting
Selecting the options menu
1
Switch on the hob using the main switch. Do not
select a cooking zone. The timer must be
switched off.
After approx. 10 seconds, the ? symbol appears
above the A symbol.
2
Touch the A symbol until two signals sound.
3
Touch the A symbol repeatedly until the required
option appears.
Use the @ symbol or the magnetic knob to select
4
the required setting.
16
¯
¯
¯
¯
¯
▯
Childlock
▯
Reset all values
▯
Selection time for selecting the cooking zone
Settings in the options menu
This table contains all of the functions and information
for making settings:
Information about making settings
The activation can be set individually for each cooking
zone that has activation. First, use the magnetic knob to
select the required cooking zone. Then use the @ symbol
to select the required setting.
Use the magnetic knob to select the required setting. On
the display, a dot appears beside the selected setting.
Note: This setting does not affect the audible timer signals,
warning signals or the main switch signal.
To be able to use the child lock, you must first enable this
function in the options menu.
Use the magnetic knob to select the required setting. On
the display, a dot appears beside the selected setting.
You can use this function to reset all of the values in the
options menu and the boiling times to their factory set-
tings.
Reset all values: Use the magnetic knob to select š. On
the display, a dot appears beside š.
If you select a cooking zone, you must set the heat setting
within the selection time. If the selection time is set to end-
less, you can change the heat setting at any time without
having to reselect the cooking zone.
5
To save the settings and exit the options menu,
touch the A symbol until two signals sound.
Notes
‒ A signal will not sound if ™ƒ-‹. Button tones
off has been set.
‒ To exit the options menu without saving the
settings, touch the # main switch.