Gaggenau CE291 Series Manual do utilizador - Página 12
Procurar online ou descarregar pdf Manual do utilizador para Hob Gaggenau CE291 Series. Gaggenau CE291 Series 16 páginas. Glass
Também para Gaggenau CE291 Series: Manual de instruções (16 páginas)
Imprimir página
en Basic settings
12 Basic settings
You can configure the appliance to meet your needs.
12.1 Overview of the basic settings
You can find an overview of the basic settings and the
default factory settings here.
Dis-
Selection
play
Automatic childproof lock
– Switched off
– Switched on
– Manual and automatic childproof lock are
switched off.
Signal tone
– Confirmation signal and operating error
signal are switched off. The main switch sig-
nal remains switched on.
– Only the operating error signal is
switched on.
– Only the confirmation signal is switched
on.
– Confirmation signal and operating error
signal are switched on.
Energy consumption display
Ask your electricity supplier what the mains
voltage is.
– Consumption display is switched off.
– Consumption display at mains voltage of
230 V.
– Consumption display at mains voltage of
400 V.
– Consumption display at mains voltage of
220 V.
– Consumption display at mains voltage of
240 V.
Automatic timer
- Switched off.
-
- Cooking time after which the hotplates
switch off.
Duration of the timer end signal
– 10 seconds.
– 30 seconds.
– 1 minute.
Activation of the heating elements
– Switched off
– Switched on
– The last setting before switching off the
1
hotplate.
1
Factory setting
12
1
1
1
1
Dis-
Selection
play
Time for selecting hotplates
always be adjusted without having to select it
again.
– You can adjust the last hotplate selected
within 10 seconds after selecting it. After this
time you have to select the hotplate again be-
fore adjusting it.
Resetting to the factory settings
– Switched on.
1
Factory setting
12.2 Changing basic settings
Requirement: The hob is switched off.
1.
Switch on the hob.
Within the next 10 seconds press and hold
2.
approx. 4 seconds.
1
a
and
a
lights up on the right-hand display.
Touch
3.
pears on the left-hand display.
Set the required value on the control panel.
4.
Press and hold
5.
a The setting is activated.
Tip: To exit the basic settings, switch off the hob using
. Switch the hob on again and reset.
– Unlimited: The last hotplate selected can
1
1
– Switched off.
flash alternately on the left-hand display.
repeatedly until the required indicator ap-
for 4 seconds.
for