Cefndy MT212 Instruções para o utilizador - Página 2

Procurar online ou descarregar pdf Instruções para o utilizador para Equipamento médico Cefndy MT212. Cefndy MT212 4 páginas. Attendant propelled & self propelled shower commode chairs

Pack Contents
F
G
Assembly Instructions
Please note:
 When unpacking carefully examine the product to ensure it is complete. See
contents list above.
 Separate Assembly instructions are included in the box, but are also included
here.
 Before you begin assembly check for any damage. If damaged please contact
your supplier and refrain from using the product.
 Do not attempt to use if the product is damaged.
Assembly
:
 Place the Chair Base Frame (A) on a level floor. At the rear of the frame you
will see two black threaded hand wheels (F). Undo the wheels so that the
holes are clear.
 Place the two legs of the back rest (B) into the holes on the back edge of the
base frame (A).
 Secure the back rest by inserting the hand wheels and turning until you feel
the nut biting against the leg of the back. Do not overtighten – finger tight is
sufficient.
 Place all four castors into the leg tubes and secure using the pin clips. If fitting
T212/MT212 see below.
 On each side of the front legs of the commode main frame there are two
retaining lugs either side.
 Take the footrests and align the holes in the inverted "U" section with the lugs.
Lower down into place.
Ref: T210/T212/MT210/MT212/X399/X499 Nov2019
Form No: Cef 0035
User Instructions for Attendant Propelled &
Self Propelled Shower Commode Chairs
T210, T212, MT210, MT212, X399 & X499
Inside the box you should find:
1 x Chair Base Frame
1 x Back Rest
B
2 x Footrests
4 x Braked Castors(T210 / MT210/X399/X499)
2 x Braked Castors & 2 x 685mm Wheels (T212 / MT212)
4 x Castor Pin Clips
2 x Hand-wheels
E
1 x Commode Potty
A
2 x Wheel Axles, Axle bushes & Stabilising bars (T212 /
MT212)
D
2 x Brake Assemblies & Brake Brackets. (T212 / MT212)
1 x User Instructions
1 x Assembly Instructions
A
B
C
D
E
F
G
-
-