Dynabrade 46001 Segurança, operação e manutenção

Procurar online ou descarregar pdf Segurança, operação e manutenção para Moedor Dynabrade 46001. Dynabrade 46001 4 páginas. .4 hp; ergo-grip, right angle

Imprimir página

Dynabrade 46001 Segurança, operação e manutenção

.4 hp Die Grinder

Ergo-Grip, Right Angle

Safety, Operation and Maintenance – Save This Document and Educate All Personnel

Model

RPM

46000

12,000

46001

15,000

46002

20,000

47800

12,000

47801

15,000

47802

20,000

48315

12,000

48316

15,000

48317

20,000

49425

3,200

DIE GRINDER

Find The Most Current Offering of Support Documents and Accessories at www.Dynabrade.com

Read and understand this tool manual before operating your air tool. Follow all safety rules for the protection of operating personnel

as well as adjacent areas. Always operate, inspect and maintain this tool in accordance with the American National Standards

Institute (ANSI) Safety Code for Portable Air Tools – B186.1. For additional safety information, refer to Safety Requirements for the Use,

Care and Protection of Abrasive Wheels – ANSI B7.1, Code of Federal Regulation – CFR 29 Part 1910, European Committee for Standards

(EN) Hand Held Non-Electric Power Tools – Safety Requirements and applicable State and Local Regulations.

Read and understand tool manual before work starts

to reduce risk of injury to operator, visitors, and tool.

Ear protection to be worn when exposure to sound,

exceeds the limits of applicable Federal, State or

local statues, ordinances and/or regulations.

Respiratory protection to be used when exposed to

contaminants that exceed the applicable threshold

limit values required by law.

Some dust created by sanding, grinding, drilling, and other construction activities contain chemicals known to cause cancer, birth defects

or other reproductive harm. Some examples of these chemicals are:

• Lead from lead-based paints

• Crystalline silica from bricks and cement and other masonry products

• Arsenic and chromium from chemically treated lumber

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well

ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

Carefully Read and Understand the General

and Die Grinder sections found in Tool Safety

and Operating Guidelines (PN00001676)

Before Handling or Using Tool.

Tool Intent:

.4 hp Die Grinder is ideal for deburring, deflashing, surface preperation, cleaning and finishing using proper abrasive stones,

abrasive mounted wheels, molded abrasives and carbide burrs. Intended for use with abrasives less than 2" (50 mm) diameter.

DO NOT USE Tool for Anything Other Than Its Intended Applications.

Training: Proper care, maintenance, and storage of your air tool will maximize tools performance and reduce chance for accident.

Employer's Responsibility: Provide operators with safety instructions and training for safe use of tools and accessories.

Report to Your Supervisor any Condition of the Tool, Accessories or Operation you Consider Unsafe.

Exhaust

Muffler

Insert Size

Rear

Extended

Rear

Extended

Rear

Extended

Front

Rear

Standard

Rear

Standard

Rear

Standard

Rear

Standard

SAFETY INSTRUCTIONS

1/4" & 6 mm

WARNING

Eye protection must be worn at all times, eye

protection to conform to ANSI Z87.1.

Practice safety requirements. Work alert, have proper

attire, and do not operate tools under the influence

of alcohol or drugs.

Air line hazard, pressurized supply lines and flexible

hoses can cause serious injury. Do not use damaged,

frayed or deteriorated air hoses and fittings.

Carefully Read all instructions before operating or servicing

any Dynabrade

Abrasive Power Tool. Products offered by

Dynabrade are not to be modified, converted or otherwise

altered from the original design.

PD12•04

February, 2012

Model 46002