Dynabrade 48201 Manual de Segurança, Operação e Manutenção
Procurar online ou descarregar pdf Manual de Segurança, Operação e Manutenção para Moedor Dynabrade 48201. Dynabrade 48201 9 páginas. .4 hp die grinder ergo-grip - rear exhaust
Imprimir página
.4 hp Die Grinder
Ergo-Grip - Rear Exhaust
Model
RPM
48201
25,000
48203
30,000
48325
25,000
48327
30,000
48341
30,000
48345
30,000
48350
35,000
48355
35,000
48360
20,000
48365
20,000
48370
25,000
FIND THE MOST CURRENT OFFERING OF SUPPORT DOCUMENTS AND ACCESSORIES AT WWW.DYNABRADE.COM
Read and understand this tool manual before operating your air tool. Follow all safety rules for the protection of operating personnel
as well as adjacent areas. Always operate, inspect and maintain this tool in accordance with the American National Standards
Institute (ANSI) Safety Code for Portable Air Tools – B186.1. For additional safety information, refer to Safety Requirements for the
Use, Care and Protection of Abrasive Wheels – ANSI B7.1, Code of Federal Regulation – CFR 29 Part 1910, European Committee for
Standards (EN) Hand Held Non-Electric Power Tools – Safety Requirements and applicable State and Local Regulations.
Read and understand tool manual before
work starts to reduce risk of injury to
operator, visitors, and tool.
Eye protection must be worn
at all times, eye protection to
conform to ANSI Z87.1.
Respiratory protection to be used when
exposed to contaminants that exceed the
applicable threshold limit values required by law.
Some dust created by sanding, grinding, drilling, and other construction activities contain chemicals known to cause cancer, birth defects
or other reproductive harm. Some examples of these chemicals are:
• Lead from lead-based paints
• Crystalline silica from bricks and cement and other masonry products
• Arsenic and chromium from chemically treated lumber
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well
ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.
Carefully Read all instructions before operating or servicing any Dynabrade
modified, converted or otherwise altered from the original design.
Tool Intent: .4 hp Die Grinder is ideal for deburring, deflashing, surface preparation, cleaning and finishing using the proper abrasive stones, abrasive
mounted wheels, molded abrasives, and carbide burrs.
This power tool is not intended for use in potentially explosive atmospheres and is not insulated against contact with electrical power.
Training: Proper care, maintenance, and storage of your air tools will maximize their performance.
• Employer's Responsibility – Provide .4 hp Die Grinder operators with safety instructions and training for safe use of tools and accessories.
Air Tool Manual – Safety, Operation and Maintenance
SAVE THIS DOCUMENT, EDUCATE ALL PERSONNEL
Collet Style
Muffler
3 Piece
Extended
3 Piece
Extended
3 Piece
Standard
3 Piece
Standard
3 Piece
Overhose
4 Piece
Standard
3 Piece
Extended
3 Piece
Extended
3 Piece
Standard
4 Piece
Standard
4 Piece
Standard
SAFETY LEGEND
WARNING
WARNING
WARNING
SAFETY INSTRUCTIONS
Do Not use tool for anything other than its intended applications.
Insert Size
1/4" & 6 mm
1/4" & 6 mm
1/4" & 6 mm
1/4" & 6 mm
1/8" & 3 mm
1/8" & 3 mm
1/8" & 3 mm
1/4" & 6 mm
1/4" & 6 mm
1/8" & 3 mm
1/8" & 3 mm
WARNING
Practice safety requirements. Work alert,
have proper attire, and do not operate tools under
the influence of alcohol or drugs.
Ear protection to be worn when exposure to sound,
exceeds the limits of applicable Federal, State or
local statues, ordinances and/or regulations.
Air line hazard, pressurized supply lines and flexible
hoses can cause serious injury. Do not use damaged,
frayed or deteriorated air hoses and fittings.
WARNING
®
Abrasive Power Tool. Products offered by Dynabrade are not to be
(continued on next page)
Parts Page Reorder No. PD11•26
Supersedes PD10•04
Effective July, 2011
WARNING
WARNING
WARNING
Model 48327