Ceil Static UPS System Manual do utilizador - Página 7
Procurar online ou descarregar pdf Manual do utilizador para UPS Ceil Static UPS System. Ceil Static UPS System 19 páginas.
Imprimir páginaImportant Precautions:
CEIL DSP Sine wave Static USP has two Battery terminals coming out from the rear side, an AC
MCB, a DC MCB, an AC output socket and an AC Input socket. Battery terminals are red and
black in colour. The red colour terminal has to be connected to the POSITIVE TERMINAL of the
battery and black one to the NEGATIVE TERMINAL.
CAUTION:
Do not reverse the battery connections as it will trip the Battery MCB/ Fuse.
Ensure that the incoming phase (or line) is connected to 'L', Neutral is connected to 'N' and
earth is connected through OUTPUT socket of the Static UPS.
General Precautions:
Before using the CEIL DSP Sine wave Static UPS read all instructions and caution
markings on the Static UPS, the batteries and all appropriate sections of this Instruction
manual.
Do not expose CEIL DSP Sine wave Static UPS to any type of chemicals.
Do not disassemble the CEIL DSP Sine wave Static UPS. Take it to a qualified our
Engineering Service Centre when service or repair is required. Opening by unqualified
person can lead to electrical shock or fire hazard.
To reduce risks of electric shock disconnect all wiring before cleaning.
WARNING:
Avoid exposing the Static UPS or Batteries to any type of explosive gases in the vicinity as
batteries generate explosive gases during normal operation. Ensure proper ventilation for the
battery compartments. The Battery enclosures should be so designed as to prevent
accumulation and concentration of hydrogen gas in 'pockets' at the top of the compartment.
Vent the battery compartment from the highest point. A sloped lid can also be used to direct
the flow to the vent opening location. To reduce the risk of battery explosion, strictly follow the
instructions of the battery supplier for any equipment you intend to use in the vicinity of
batteries.
Use the correct tools to make AC/DC wiring connections.
Do not install this CEIL DSP Sine wave Static UPS on or near flammable materials
(plywood, chemicals, gasoline etc)