Dynabrade Dynafile 14000 Manual de Segurança, Operação e Manutenção - Página 11

Procurar online ou descarregar pdf Manual de Segurança, Operação e Manutenção para Ferramentas Dynabrade Dynafile 14000. Dynabrade Dynafile 14000 12 páginas. 20,000 rpm / versatility kit
Também para Dynabrade Dynafile 14000: Manual de Segurança, Operação e Manutenção (12 páginas)

Dynabrade Dynafile 14000 Manual de Segurança, Operação e Manutenção
Contact Arm Assembly/Disassembly Instructions
1
SLIP FIT
REMOVE CONTACT ARM FROM MACHINE.
PRESS CONTACT WHEEL SHAFT OUT OF CONTACT ARM.
2
REMOVE OLD BEARING FROM WHEEL
3
PRESS BEARING INTO EACH SIDE OF WHEEL
Abrasive Belt Exchange Instructions
1
With your thumb, pull and slide
guard open in a clockwise direction.
4
Slip belt over contact wheel.
Release idler arm lever. Operate on
the contact wheel or on the return
side of the belt.
Reference Contact Information
1. American National Safety Institute – ANSI
24 West 43
rd
Street
Fourth Floor
New York, NY 10036
Tel: 1 (212) 642-4900
Fax: 1 (212) 398-0023
11275 CONTACT WHEEL SHAFT
REMOVAL TOOL
PRESS FIT
11271 WHEEL POSITION BLOCK
11276 BEARING REMOVAL TOOL
FOR 1/4" ID CONTACT WHEEL
11277 BEARING REMOVAL TOOL FOR
3/8" ID CONTACT WHEEL
CONTACT WHEEL
11271 WHEEL POSITION BLOCK
11274 CONTACT WHEEL BEARING
MOUNT TOOL
CONTACT WHEEL
2
Form a loop in belt keeping the belt
splice between fingers as shown in
photo above. Slip lower loop of belt
under the drive wheel.
2. Government Printing Office – GPO
Superintendent of Documents
Attn. New Orders
P.O. Box 371954
Pittsburgh, PA 15250-7954
Tel: 1 (202) 512-1803
11279 CONTACT WHEEL SHAFT
4
ADHESIVE
MOISTEN TIP OF PIPE CLEANER WITH CONTACT WHEEL
SHAFT ADHESIVE AND APPLY TO ID OF BEARINGS BEFORE
INSTALLING PROPER SHAFT.
DO NOT GET ADHESIVE ON FACE OF BEARING.
5
CONTACT WHEEL SHAFT
SLIP FIT
PRESS
FIT HERE
11271 WHEEL POSITION BLOCK
INSTALL NEW SHAFT
5
Completely close the guard.
11
PIPE CLEANER
INSERT INTO
BORE OF BEARING
BEARING
3
Depress idler arm lever and pull belt
toward the contact wheel.
3. European Committee for Standardization
Rue de Stassart 36
B - 1050 Brussels, Belgium