Aircraft AIRBOY 206 OF E Manual de Instruções - Página 8
Procurar online ou descarregar pdf Manual de Instruções para Compressor de ar Aircraft AIRBOY 206 OF E. Aircraft AIRBOY 206 OF E 18 páginas. Mobile compressor
Imprimir página
Technical data
3.2 Residual risks
Even if all safety regulations are observed there will remain
a residual risk in the operation of the compressor, descri-
bed in the following. All persons working with the com-
pressor must know these residual risks and follow the in-
structions which prevent any accidents or damages
caused by these residual risks. During set-up and adjust-
ment works it may become necessary to remove safety de-
vices installed by the customer. This causes different resi-
dual risks and hazard potentials each operator must be
aware of.
4
Technical data
AIRBOY 186 OF E
Maximum volume
180 l/min
flow
Max. pressure
8 bar
Tank capacity
6 Liters
Cylinders/levels
1 /1
Number of revolu-
3400 rpm
tions
Engine power
1,1 kW / 230 V
Type of Protection
IP 20
Duty cycle
S3-25
Weight
9,2 kg
Dimension(Lx-
315x355x370
BxH) [mm]
Sound power level
97 dB(A)
L
A *
W
*Sound power level according to DIN EN ISO 3744 (RL 2000/14/EG)
4.1 Type plate
The type plate (Abb.2) shows the following information:
Fig. 2: Type plate
Designation of model
Power of engine
connection data
Years of construction
Item number
Serial number
8
5
5.1 Delivery and Transport
Delivery
Check the compressor for any visible transportation
damages after delivery. If the compressor shows any
damages, immediately inform the carrier or the distribu-
tor.
Check whether the compressor is complete and
whether all parts included in the scope of delivery are
present.
AIRBOY 206 OF E
Transport
180 l/min
The compressor may only be transported with the en-
gine switched off and disconnected from the mains. The
container must not be under pressure during transport.
8 bar
6 Liters
5.2 Packaging
1 /1
Keep the packaging for a possible move, but at least
3400 rpm
during the warranty period.
All used packaging materials and packaging aids the
1,1 kW / 230 V
compressor are recyclable and generally need to be
IP 20
transported to the material recycling.
S3-25
Crush the packaging material made of cardboard and
supply it to the waste paper collection.
9,0 kg
The films are made of polyethylene (PE) and the uphol-
385x170x465
stery parts are made of polystyrene (PS). These materi-
als have to be delivered to a recycling station of the re-
97 dB(A)
sponsible dumping company.
5.3 Storage
The Compressor must be stored thoroughly cleaned in a
dry, clean and frost-free environment.
Do not store or transport the compressor outside or in a
moist environment.
Transport, packaging, storage
AIRBOY | Version 1.07