Daymak Beast 2.0 Deluxe Manual do utilizador - Página 7

Procurar online ou descarregar pdf Manual do utilizador para Scooter Daymak Beast 2.0 Deluxe. Daymak Beast 2.0 Deluxe 20 páginas.

Beast Operation (cont'd)

Turning on your unit

Handlebars, on each unit you will nd a few buttons and switches. Here is what everything does.

Right Handle Bar

1) Front Brake - Pull this lever to engage the front brake.

(Use the rear brake rst located on the left handle

bar.)

2) Throttle - Slowly rotate this towards you to engage

the motor.

*PLEASE NOTE* At rst always turn the throttle with

the unit on the center kickstand to get a feel for it. If

not on the center kickstand, always be sitting on the

unit before turning the throttle.

3) Horn - Push this to honk the horn.

4) Lights - Push this to the right most position to turn on

all lights. Push this to the middle position to have just

the rear lights on. Push this to turn o all the lights.

5) 3 Speed Switch - Choose between 1 of 3 speeds.

Position 1 will get you the furthest range at the slow-

est speed. Position 3 will get you there fastest with the

shortest range.

Left Handle Bar

1) High Beam / Low Beam - Toggle this switch to choose

between a low or high angle of the headlights. (The

headlight must be on for this to have an e ect)

2) Turn Signals - Push this to the left to indicate turning

to the left and into the middle once your done. Push this

to the right if you are turning to the right.

3) Reverse switch - Press and hold this while engaging

the throttle to go in reverse.

*PLEASE NOTE* Always be aware of your surround-

ings when operating this in reverse and use it at your

own discretion

4) Horn - Push this to honk the horn.