GREAT PLAINS Turbo Max 2400TM Manual de montagem - Página 6

Procurar online ou descarregar pdf Manual de montagem para Semeadores GREAT PLAINS Turbo Max 2400TM. GREAT PLAINS Turbo Max 2400TM 8 páginas.

Step #3

62312-ASEMBLY

(8/16/21)

Connect the s-hook as shown and clinch s-hook so it cannot come off.

Connect s-hook to sash chain and clinch end to s-hook. Connect key ring to spring on run\hold switch.

Note: Chain may have to be shortened to meet desired length needed. Make sure implement can float and that there

is no tension on spring when lowered so Run/Hold switch is not starting and stopping the electric motor when

traveling.

Route wire (62253-5) from Run/Hold Switch along frame to front corner of hopper and connect

wire adaptor (62253-6) to end of wire (62253-5). Connector wire adaptor to white plug (electric motor) in front

corner of hopper.

The Run/Hold switch is wired from the factory to be nominally closed.

The chain has to be pulled to release the switch to stop the electric motor.

Note: The Run/Hold switch only turns on or off the electric motor.

For stopping for long periods of time shut-off the center master switch to cut all power to motor and clutches.

Page 4 of 4