Agrilight Agribox Small Manual do utilizador e instruções de montagem - Página 4

Procurar online ou descarregar pdf Manual do utilizador e instruções de montagem para Unidade de controlo Agrilight Agribox Small. Agrilight Agribox Small 10 páginas.

Imprimir página

Operation

Main switch
The main switch is intended for switching the Agribox unit on and off and not for switching the lighting in
the livestock pens on and off. When in use, always leave the main switch in the I ("ON") position.
1. Position 1 ("ON") = Agribox switched on.
2. Position O ("OFF") = Agribox switched off.
The main switch can be locked.
Always switch the main switch off (O = "OFF") before commencing with service or
maintenance activities on the Agribox or lighting installation.
Always lock or secure the main switch, for example with the use of a padlock, to ensure
that it cannot be switched on unintentionally!
Selector switches
Agribox Small
A
A = Day – Off – Night switch
B = On – Off – Auto switch
Auto-switching
In order for the cabinet to operate automatically, the selector
switch must be set to the "On-Off-Auto" "Auto" position.
The timer clock switches the lighting automatically in conjunction
with the Klemko twilight sensor.
Caution: When operating in Autoswitch mode, the
"Day-Off-Night" switch must always be in the "Off"
position.
Manual Switching
In order for the cabinet to be operated manually, the selector
switch must be set to the "On-Off-Auto" "On" position.
The "Day-Off-Night" button can then be used for manual
switching:
•
Day:
daytime lighting ON
•
Off:
all lights OFF
•
Night: night lighting ON
When the switch is set manually to the "On-Off-Auto" "Off"
position, all lights will switch off.
The night-lighting does not switch on/off automatically; it must
be switched on/off manually using the Day-Night switch.
Caution: When the switch is set to manual, there
must be a delay of 10 minutes between switching
off and switching on again. This is to prevent
permanent damage to the lights if they were to be
switched on within a 10 minute period.
4
Agribox Medium
B
A = On – Auto – Off – Night switch
B = On – Off – Auto switch group 1 (Day 1)
C = On – Off – Auto switch group 2 (Day 2)
Auto-switching 'Daytime lighting'
(preferred setting)
Set groups 1 and 2 to "AUTO"
Daytime lighting of group 1 will switch on after the set value of
twilight sensor 1 has been reached.
Daytime lighting of group 2 will switch on after the set value of
twilight sensor 2 has been reached.
Manually switching 'Daytime Lighting"
Set the switch of one of the desired groups 1 or 2 to the "ON"
position.
Group 1 will switch on immediately and if groups 1 and 2 are
switched on together, group 2 will come on after a short delay of
50 seconds.
Auto-switching "Night Lighting"
Set Night-Switch manually to the "Auto" position.
Manually switching 'Night Lighting"
Set Night-Switch manually to the "On" position. The night-
lighting will now switch on immediately. The night-lighting can
be switched off again by turning the switch to the "Off"
position.
A
B
Caution: After switching a group off and immediately
on again, there will be a pre-programmed delay of 10
minutes before the daytime lighting turns on again.
This is to prevent damage to the lights.
Caution: In AgriLED armatures, there is a delay of 10
minutes when switching between night-time lighting
and day-time lighting.
Attention when using AgriLED armatures: if the unit is
switched on shortly after the day-time lighting has
illuminated, there will be an automatic delay of 10
minutes before the night-lighting is activated.
Attention: After switching on the night-lighting manually,
this can be turned off again when leaving the livestock
enclosure by setting the Night switch to the "Auto" or
"Off" position.
C