CEL BL1 Manual do utilizador - Página 7
Procurar online ou descarregar pdf Manual do utilizador para Ventilador CEL BL1. CEL BL1 12 páginas. 18v li-ion cordless blower
Imprimir páginaAssembly and Charging the Battery
Before using the blower familiarise yourself with all the operating features and safety requirements.
Only use the blower as intended.
BEFORE STARTING THE BLOWER YOU MUST FIT
THE TUBE.
To fit the tube, align with the head of the blower taking
note of the notch to aid alignment. The release button
should click as the tube is engaged. Check the tube is
secure before operating the blower.
A new battery or one that is completely run
down should be charged for 4 hours. After
normal use a battery should be fully charged in
about 1 hour.
1. Place the charger in a safe position away from
moisture, heat or any hazard to the charger or
other danger.
2. Connect to suitable power outlet and switch on.
The red light blinking and green light lit indicates an
error. Check the temperature in the area is within
specified limits or wait for the battery to cool down.
3. Turn the battery so
the rails slide smoothly
into place on the
charger and press
together firmly.
Charging lights indicator
LIGHT
POWER ON
CHARGING
CHARGED
ERROR
It is normal for the battery charger to hum and be
warm but not hot during operation.
If the battery does not charge properly, check to
make sure the electrical outlet is " l ive" and that the
air surrounding the battery and charger is between
10ºC and 24ºC (50ºF) and (75ºF).
Make sure the battery is correctly fitted.
Always remove the battery pack and unplug the
charger and store it in a dry, secure place when
not in use.
To reduce the risk of fire do not leave the charger
on for longer than 24 hours.
Button
Feed Hole
Notch
RED
GREEN
ON
OFF
ON
BLINK
ON
ON
BLINK
OFF
3.0