Affordable Wheelchair Lifts KCSPM3648 Manual de instalação - Página 11
Procurar online ou descarregar pdf Manual de instalação para Sistemas de elevação Affordable Wheelchair Lifts KCSPM3648. Affordable Wheelchair Lifts KCSPM3648 14 páginas.
Também para Affordable Wheelchair Lifts KCSPM3648: Manual do Proprietário (12 páginas)
Imprimir página_____________________________________________________________________________________
If the Platform stops higher than you want, then lengthen the limit switch
actuator to force the Platform to stop lower:
● Determine how many inches lower you want the Platform to actually go.
● Lower the platform a bit to give you some slack to work with.
● (You can do the steps below without removing the Safety Guard. The metal
rod can just slide out once you remove the plastic rod.)
● Lengthen the limit switch actuator by the number of needed inches by raising
the nuts on the metal rod.
● Do not raise the nuts any higher than 2" from the upper end of the metal rod,
or the upper rod will not be stable on the lower rod.
● If you cannot raise the nuts enough you can always replace the plastic rod
with a longer one. The upper rod is simply 1" diameter EMT pipe that can be
bought at any hardware store and easily cut to a different length. It is pressure
fitted onto the trigger plate, so you can easily attach the trigger mechanism to
your new pipe. (If your lift arrived assembled and did not include assembly
instructions, please visit our website at
additional information.)
Leveling Your Lift
Use a level and shims to shim the base so that the lift is level. The most critical
point to adjust the leveling is between the edge of the Bridge of the
Platform and the landing.
_____________________________________________________________________________________
w ww.affordablewheelchairlifts.com
for