GREAT PLANES Big Stir 40 Manual de instruções - Página 9

Procurar online ou descarregar pdf Manual de instruções para Brinquedo GREAT PLANES Big Stir 40. GREAT PLANES Big Stir 40 20 páginas.

❏

3. Carefully cut away the covering from the bottom of the

fuselage in the stab saddle.

❏

4. Mount the wing to the fuselage using the nylon bolts.

Lay the plane upside down and place the horizontal stabilizer

into position. Check the alignment as shown in the photo.

Horizontal Stabilizer

Wing

❏

5. Stand back 8 to 10 feet (2.5 to 3 meters) and view the

model from the front and rear. The stabilizer tips should be

equally spaced in relation to the wing. If not, lightly sand the

high side of the stabilizer saddle to correct the problem.

Work slowly and check the alignment often.

❏

6. When the alignment looks good, mark the outline of

the fuselage onto the stabilizer. Remove the stabilizer and

trim the covering 1/32" (.8mm) inside of the lines, being

careful not to cut into the underlying wood. Re-check

your alignment and glue the stabilizer to the fuselage with

6-minute epoxy.

C = C