GREAT PLANES Douglas DC-3 Manual de instruções - Página 5

Procurar online ou descarregar pdf Manual de instruções para Brinquedo GREAT PLANES Douglas DC-3. GREAT PLANES Douglas DC-3 20 páginas.

GREAT PLANES Douglas DC-3 Manual de instruções
Before starting to build, use the Kit Contents list to take an inventory of this kit to make sure it is complete and inspect
the parts to make sure they are of acceptable quality. If any parts are missing or are not of acceptable quality, or if you
need assistance with assembly, contact Great Planes Product Support. When reporting defective or missing parts, use
the part names exactly as they are written in the Kit Contents list on this page.
8
9
10
11
12
13
1. Fiberglass Fuselage
2. Right Wing Panel w/Aileron
3. Left Wing Panel w/Aileron
4. Horizontal Stabilizer w/Elevators
5. Rudder
6. Wing Center Section
7. Center Section Bottom Fairing
5mm x 50mm Wooden Dowel
Velcro
®
Battery Straps [2]
2.0mm Elevator Joiner
1.7x99mm Aileron Pushrods [2]
2.5mm Washers (Motor Mount) [4]
2.5x11.5mm Flanged Phillips Screws
(Landing Gear Straps) [4]
2.5x7.5mm Phillips Screws (Motor
Mounts) [4]
Nylon Tie Strap
2.5x9.5mm Flanged Phillips Screws [6]
25mm Tail Wheel
KIT INSPECTION
3002 N. Apollo Drive, Suite 1, Champaign, IL 61822
Telephone: (217) 398-8970, Fax: (217) 398-7721
2
14
12
Kit Contents (Photographed)
8. Cowl Top [2]
9. Cowl Bottom [2]
10. Cowl Front [2]
11. Propellers [2]
12. Propeller Adapters [2]
13. Speed 400 Motors [2]
14. Wiring Harness w/ ESC and Switch
Kit Contents (Not Photographed)
75mm Main Landing Gear [4]
Decal
2mm Wheel Collar (Tailgear)
2x12mm Phillips Screws (Rudder/Elevator) [4]
2x16mm Phillips Screws (Ailerons) [4]
3mm Set Screws [18]
3x34mm Axles [2]
4mm Washers (Wing Bolts) [2]
4x22mm Wing Bolt [2]
600mm Pushrod Outer Tubes [2]
700mm Pushrods w/Z-Bends [2]
Propeller Shaft Extensions [2]
1
6
5
4
5
3
17
7
18
15
16
15. 1/8" [3.2mm] Ply Servo Tray
16. 51.5mm Main Wheels [2]
17. 1/8" [3.2mm] Ply Mid Former (Servo Tray)
18. 1/8" [3.2mm] Ply Aft Former (Servo Tray)
19. 1/8" [3.2mm] Ply Wing Joiners [4]
20. Fiberglass Nose Hatch Strips [4]
21. 1/8" [3.2mm] Ply Forward Battery Tray
CA Hinges [4]
Hinge Points [2]
Wing Bolt Blind Nuts (Installed in Fuse)[2]
Large Nylon Clevis [2] w/Retainers
Main LG Adapters [4]
Nylon LG Straps [2]
Plastic Spacers for Landing Gear [4]
Screw-Lock Connectors
Nylon Retainers (Screw-Lock Connectors) (2)
Small Nylon Control Horns [4]
Tailgear Wire
19
20
21