Aircraft in Miniature Limited Historic Wings Fokker Spin 1912 Manual de instruções de montagem - Página 7
Procurar online ou descarregar pdf Manual de instruções de montagem para Brinquedo Aircraft in Miniature Limited Historic Wings Fokker Spin 1912. Aircraft in Miniature Limited Historic Wings Fokker Spin 1912 10 páginas. 1:72 metal kit
Imprimir página
(5) Pull the film smooth and attach the other three sides of the panel of film, so
that it is smooth and not slack.
(6) When the film is securely attached, use a sharp blade to trim off the excess
film.
(7) Do this procedure again for all the other panels to be covered.
(8) Use a hot air gun to heat-shrink the film.
C Apply the decals (see the 3-view drawing). Some photographs show the
'Fokker' markings on the rudder, while others (including the replica have
the large Fokker under the wings. Because these have continuous carrier
film they must be trimmed to the edge of the printed area. If you put the
markings under the wings we suggest that you apply each letter separately.
7 RIGGING
A Add rigging if desired as shown in Figure 6 below and the 3 view drawing. We
have found black monofilament to give good results.
Figure 6