GREAT PLANES ElectriFly Sopwith Pup Manual de instruções - Página 3

Procurar online ou descarregar pdf Manual de instruções para Brinquedo GREAT PLANES ElectriFly Sopwith Pup. GREAT PLANES ElectriFly Sopwith Pup 12 páginas.

Imprimir página
GREAT PLANES ElectriFly Sopwith Pup Manual de instruções
We, as the kit manufacturer, provide you with a top quality,
thoroughly tested kit and instructions, but ultimately the
quality and fl yability of your fi nished model depends
on how you build it; therefore, we cannot in any way
guarantee the performance of your completed model,
and no representations are expressed or implied as to
the performance or safety of your completed model.
Remember: Take your time and follow the instructions to
end up with a well-built model that is straight and true.

DECISIONS YOU MUST MAKE

This is a partial list of items required to fi nish the Sopwith Pup
that may require planning or decision making before starting to
build. Order numbers are provided in parentheses.
Motor, Battery and ESC
Recommendations
The ElectriFly Sopwith Pup was designed to fl y with a RimFire
250 (28-13-1750kV) Outrunner Motor (GPMG4502)
powered by either a 7.4V (2S) 300mAh ElectriFly Power
Series LiPo Battery (GPMP0594) or a 7.4V (2S) 300mAh
ElectriFly Competition BP LiPo Battery (GPMP0700). The
Power Series battery will allow the Pup to fl y longer, but the
Competition BP is lighter weight and will provide more power.
An ElectriFly SS-8 8 Amp Brushless ESC (electronic speed
control) is also required (GPMM1800).
Finally, a suitable propeller such as a Great Planes 8 x 6
Power Flow Slo-Flyer Electric Propeller (GPMQ6610, qty.
2) will also be required.
1
5

KIT CONTENTS

2
7
5
6
6
8
9

Radio Equipment

The ElectriFly Sopwith Pup is designed to fl y on three
channels—elevator, rudder and throttle. Two ES40 Pico
Micro Servos (GPMM1200) are recommended and are
featured in this manual. A minimum 3-channel receiver is
also required.

ADDITIONAL ITEMS REQUIRED

In addition to common hobby tools, this is the list of additional
accessories and building supplies required to fi nish the Pup.
Order numbers are provided in parentheses.
❏
Medium foam-safe CA (GPMR6069)
❏
J&Z R/C-56 white glue (or any household white glue)
❏
Optional: Black thread or string for fl ying wires (see page 8)

KIT INSPECTION

Before starting to build, take an inventory of this kit to make
sure it is complete, and inspect the parts to make sure they
are of acceptable quality. If any parts are missing or are not of
acceptable quality, or if you need assistance with assembly,
contact Product Support.
Great Planes Product Support
3002 N Apollo Drive, Suite 1
Champaign, IL 61822
Telephone: (217) 398-8970, ext. 5
Fax: (217) 398-7721
3
4
10
11
12
13
3
1. Cowl
2. Fuselage
3. Vertical Stabilizer
4. Horizontal Stabilizer
5. Struts (2)
6. Cabanes (2)
10
7. Pilot
8. Bottom Wing
9. Top Wing
10. Landing Gear Covers (2)
11. Landing Gear Wire
12. Wheels (2)
13. Wheel Covers (2)