ActiveAid 922 Manual do Proprietário - Página 6

Procurar online ou descarregar pdf Manual do Proprietário para Cadeira de rodas ActiveAid 922. ActiveAid 922 15 páginas.

Assembly

1. Remove all parts from the shipping container(s).

Remove all packing material from the parts. Recycle

shipping and packing materials in accordance with the

recycling codes of your location.

Move the side frames apart and pull forward on the Fold

Frame Pull Pin until the fold frame locks into place

2. Place the front seat snap brackets onto the front seat

support tubes and than place rear seat snap brackets

onto the rear seat support tubes.

Make sure that the seat is square, and all 4 corners are

snapped into place before sitting on chair.

Front Snap Bracket

3. Loosen then remove the self-locking nut and screw that

are in the chair frame where the back assembly will be

attached and set aside.

Tools required for setup: 3/4" wrench, 3/4" socket wrench, 7/16" wrench,

#10 metric wrench, 5/32" hex key

Rear Snap Bracket

Fold Frame Pull Pin