GREAT PLANES YAK-55M Yakovlev Manual de instruções - Página 10
Procurar online ou descarregar pdf Manual de instruções para Brinquedo GREAT PLANES YAK-55M Yakovlev. GREAT PLANES YAK-55M Yakovlev 20 páginas. Arf plane
Imprimir página
❏ ❏
3. Install a 4mm wheel collar on the axle, then the
foam main wheel, followed by a second 4mm wheel collar.
Secure the wheel collars on the axle with 3mm set screws.
Mark the location where the set screw, in the outer wheel
collar, tightens on the axle and use a metal cutting file to file
a flat spot on the axle. Apply a drop of thread locker on the
set screws and reinstall the wheel collars on the axle.
❏ ❏
4. Attach the main landing gear to the fuselage with
three 4-40 x 1/2" SHC screws, #4 lock washers and #4 flat
washers. Before installing, apply threadlocker to the threads
of the SHC screws.
❏
5. Repeat steps 1-4 for the left main landing gear.
Install the Motor
The Yak-55M EP has been designed to use the Great Planes
RimFire .32 Outrunner Brushless motor. If you will be installing a
different motor, you may need to modify the plywood motor box.
❏
1. Install the RimFire motor using four 4-40 x 1/2" [12.7mm]
SHC screws, four #4 lock washers and four #4 flat washers.
Before installing, apply a drop of threadlocker to the threads
of the SHC screws.
❏
2. Attach a 9" [229mm] servo extension to the ESC.
Connect the ESC to the motor. The ESC can be attached
to the side of the motor box with adhesive-backed hook and
loop material.
❏
3. Use a sharp hobby knife to trim the covering from over
the cooling air exit hole in the bottom of the fuselage.
10