GREAT PLANES Tori Manual de instruções - Página 16

Procurar online ou descarregar pdf Manual de instruções para Aeronaves GREAT PLANES Tori. GREAT PLANES Tori 20 páginas.

E. Cover the bullets with 3/16" [4.8mm] shrink tubing (not

included).

❏

10. Remove the propeller from the motor before

connecting the ESC! Then, connect the ESC to the motor

and your receiver and power up the radio so you can run the

motor. Make sure the motor is turning in the correct direction.

If not, simply swap any two of the wires between the ESC

and the motor.

❏

11. Mount the ESC to the side of the fuselage with double-

sided foam mounting tape. If necessary, the included lite-

ply wire holder may be glued into position to keep the motor

terminal wires from contacting the motor.

Final Assembly

❏

1. Install the receiver so it will be secure, somewhat

cushioned and so the antennas will be positioned according

to the manufacturer's instructions. In this Tori, we taped one

of the antennas to the bottom of the fuselage before installing

the receiver, then fi t the receiver under the pushrod guide

brace with 1/4" RC foam under the receiver. A hole was

drilled in the fuselage side for a plastic guide tube (cut from a

tube from a spray can or similar – not included) for the other

antenna to achieve the 90° separation specifi ed for the Tactic

receiver. (Note that the antennas do not have to be outside

the fuselage, but doing it this way was quick and simple.)

❏

2. Trim the softer, "loop" side of the included adhesive-

back hook-and-loop material to fi t the battery, and then

attach to the battery.