Emerald Planet EP-RFBASE Instruções de instalação - Página 4

Procurar online ou descarregar pdf Instruções de instalação para Alarme de fumo Emerald Planet EP-RFBASE. Emerald Planet EP-RFBASE 4 páginas.

WARNING: Improper wiring may result in damage to the

alarm, failure to operate, or a shock hazard. Do not connect white

interconnection wire to L or N.

Wiring mode:

Before connecting the power cord, please pay attention to the label

indication next to the terminal, and then connect to the L, N, and I line

according to the instructions (see Diagram 3).

 L --- Live wire of AC line

 N --- Neutral wire of AC line

 I --- I/O interconnection line

 E ---Earth

ARNING:



This product should be installed only by a licensed, qualified

electrician.



Observe and follow all local and national electrical and building

codes for installation.



Isolate from mains power prior to wiring.



Use a minimum of 0.8mm

including signal wire.

Installation:

1. Connect the L, N,

and I lines to the base

3.Align the raised Arrow

markings and clickthe smoke

alarminto the base.

250V insulated wire for all wiring,

2.Fix the base on ceiling with

screws and plastic plugs

4. To remove, use a flat

screwdriver to gently lever each

of the three tabsopen.